call today 1-800-MM Miata

site search   





 

Shipping charges range from $45-$75.
Ask your operator for details.
Note: Style Bars are a cosmetic item, and provide no roll-over protection. Most Roll Bars are available in highly polished 304 alloy stainless steel, powder coat finish in semi-flat black, leather or vinyl wrapped.

*Note-Windblocks and Saddlebags can be purchased separately

 

Frenzy Products LLC

Twin Hoop Style Bars -
Duplicate the look of the old Cobras with style bars. This bar simply mounts between the seat belt towers using existing bolts. This bar can be used with both the hard top and soft top. No drilling necessary. Black or chrome. MADE IN USA

MM045-CAB Classic Black Style Bar 90-05 90-05 $239.95
MM045-CAC Classic Chrome Style Bar 90-05 90-05 $269.95

 

MM130-STYLE Frenzy Classic Lexan Windblock 90-05 90-05 $69.95
 

 

Miata Twin Wave Style Bar 90-05

will work with Factory Windblock without modifications

Simple 15-30 minute install, includes hardware and instructions. These bars have a swept back design that compliments the seat profile, and allows for usage of the factory windblocks, including Windblock Mounted Speaker System, as well as aftermarket hard boots! The stainless steel is TIG welded and hand polished to look like jewelry!

Compatible with factory hard tops, all plastic rear window soft tops and factory glass rear window soft tops. The soft boot still fits perfectly.

Does not affect seat recline in full back position. MADE IN USA

 

 


MM045-CAW Stainless Wave Style Bar 90-05 90-05 $269.95
MM045-CAWB Black Wave Stylebar 90-05 90-05 $239.95
 

MM130-WAVE Frenzy Wave Lexan Windblock 90-05 90-05 $69.95
 

 

Miata TT Style Bar 90-05

Simple 10 minute install, includes hardware and instructions.

Add some style to that Miata with our TT style Bar. Fits 1990 thru 2005 Miatas. Does not affect seat recline in full back position. Simple 10 Minute No Cut Installation-Hardware and Instructions Included. Compatible with Hard and Soft Tops Including Factory Rear Glass. This product is not compatible with Factory windblocks. Available in Black or Chrome. MADE IN USA

*Integral Chassis Brace

*DOES NOT PROVIDE ROLLOVER PROTECTION

 

*Windblock not included


MM045-CACTT Stainless TT Style Bar 90-05 90-05 $269.95

MM045-CABTT Black TT Style Bar 90-05 90-05 $239.95


MM130-TT Frenzy TT Lexan Windblock 90-05 90-05 $69.95
 

  Want the saddlebag shown in the pictures? Click here: <storage>

 

Racing Beat Type II Bar for 1990-2005 Miata MX-5-
This style bar utilizes thick-walled 2 1/4-inch mandrel-bent tubing in a classic twin hoop design that projects a muscular and aggressive image. Note: Style Bars are a cosmetic item, and provide no roll-over protection. MADE IN USA
 

MM185-RT2B9 Racing Beat Type II Style Bar Full Recline Black 90-03 90-05 $294.95
MM185-RT2C9 Racing Beat Type II Style Bar Full Recline Chrome 90-03 90-05 $344.95

MM130-STYLE Frenzy Classic Lexan Windblock 90-05 90-05 $69.95
 

Racing Beat Type V Style Bar - THEY ARE BACK!!

MADE IN USA

Styling Change
This newly redesigned Type V bar does not feature the lower cross-bar that was present on earlier models. This component was deleted from the current bar to allow compatibility with the factory wind blocker, the Racing Beat 3-Piece Deck Cover, aftermarket replacement tops with glass windows, etc...

Appearance

The Type V Style Bar is a departure from other style bars with its wide, aerodynamic design. This bar measures 4-inches across, which further adds to its sleek and dynamic aero-design. Hand-tailored padding and upholstery-grade vinyl lend a level of elegance that complements any Miata. The graceful lines of the Type V give hints of its European design elements.

Manufactured entirely in the USA, each Type V style bar is supplied with detailed, illustrated instructions and can be installed in approximately 2 hours using basic tools. The addition of this, or any Style Bar, will add chassis stiffening to the mid-section of any Miata.

Fitting Notes
All of the Racing Beat style bars are designed to operate with both the stock factory soft and hard tops. This style bar can be installed on cars that are equipped with the Mazda-factory Wind Blocker in place. (Note: This bar can also be used with the aftermarket Oris windblocker unit in place.) Additionally, on the 1990-2000 Miata, rearward seat travel is not impeded, but the headrest will rest inside the upper bar. In 2001, Mazda redesigned the seats on the Miata to feature a taller seat back. This taller seat will not fit under the bar as with the earlier models. On the 2001-03 cars, the seat backs will rest against the forward edge of the bar, which results in a restriction of the upper seat back by two (2) “clicks”. Note: Vision through the rearview mirror is reduced with the use of this bar on ALL models.

MM185-RT5 Racing Beat Type V Style Bar Black 90-03 90-03 $324.95
MM185-RT52 Racing Beat Type V Style Bar Tan 90-97 90-97 $324.95

Hard Dog Functional Roll Bars- Nothing screams “performance” quite like a roll bar. Yet it also provides a feeling of security. We offer and HIGHLY recommend a wide variety of roll bars that will provide you that security you want. Professional Installation Required. MADE IN USA

These pictures attest to the top quality of Hard Dog's Rollbars:

Hardbar Single Hoop

Hard Bar Sport

M2 Sport

WARNING: This article is sold without warranty, expressed or implied. No warranty is made to this product's ability to protect the user from any injury or death. The user assumes that risk.

Hard Bar Application Guide

Bar Type

M1 (90-97)

M2 99-05

Hard Top**

SCCA Solo II

         
Hard Bar
yes
yes
yes
Deuce
yes
yes
yes
Extreme
yes
yes
yes
Hard Bar Sport
yes
yes
yes
yes
Hard Core
yes
yes
yes
yes

** The hard top will fit but side latches will be inoperable.

The Hard Bar Sport -
The Hard Bar Sport uses the same design as the Hard Bar, but with the addition of larger bolts in the main hoop mounting plates and two rear braces that bolt in just ahead of the rear suspension shock mounts. (Main hoop diagonal and/or a harness bar may be added.) Street/Solo 2 approved
   

MM045-SP9 M2 Sport Bar Black 90-05 90-05 $305.95

MM045-SP3 M2 Sport Bar Stainless 90-05 90-05 $789.95

MM045-SP29 M2 Hard Bar Sport w/single Diagonal Black 90-05 90-05 $339.95
MM045-SP4 M2 Sport Bar w/single Diagonal Stainless 90-05 90-05 $889.95

MM045-SP2D M2 Hard Bar Sport w/double Diagonal Black 90-05 90-05 $379.95
MM045-SP2DS M2 Sport Bar w/double Diagonal Stainless 90-05 90-05 $982.95
 

Hard Bar Single Hoop -
The Hard Bar has a four point mounting system. The Hard Bar is made of 1020 DOM tubing (1-1/2” diameter x .125" wall thickness) using 3/16" mounting and backup plates. The main hoop ties into the top of the seat belt brackets using existing shoulder harness hardware. Hardware and instructions included.
   

MM045 Hard Bar Single Hoop-Black 90-05 90-05 $209.95

MM045-SS Hardbar Single Hoop Stainless 90-05 90-05 $458.95

 

Deuce Roll Bar-
All the style with all the function. Harddog has developed a stylish but functional twin hoop bar for your Miata. Exacting standards such as full seat travel, complete use of your hard and soft top, black powder or polished stainless, and 1.75" tubing. Complete instructions. Center braced bars not compatible with glass rear windows on 90-97, but do work for 99-05 Miatas with OEM glass window tops and any year plastic window tops.
   

MM045-D1 Black Side Braced Deuce 90-05 90-05 $404.95
MM045-D3 Stainless Side Braced Deuce 90-05 90-05 $938.95

MM045-D2 Black Center Braced Deuce 90-05 90-05 $404.95
MM045-D4 Stainless Center Braced Deuce 90-05 90-05 $938.95

 

Extreme Bar -
Here is another new level in bar technology. Allows for full seat travel and tilt, full use of hard top, soft top and glass rear window. You can order the double with a durable powdercoat finish or polished stainless steel. It is constructed of highest quality tubing 1.75” diameter x .120” wall, 3/16” mounting plates. Complete hardware kit with grade 8 bolts and instructions.
 
MM045-HE2 Black Extreme Roll Bar 90-05 90-05 $368.95

MM045-HE4 Stainless Extreme Roll Bar 90-05 90-05 $898.95

 

M2 Hard Core Bar (racing bar) 1990-2005 -
Designed for the serious competitor that wants to maintain a dual purpose car for street and racing use. Tallest available. (1 3/4” diameter x .125” wall). Does not work with a Hardtop, see below for Hard Core bars with Hardtops.

   

MM045-HC M2 Hard Core w/single Diagonal Black 90-05 90-05 $404.95

MM045-HC9D M2 Hard Core w/double Diagonals Black 90-05 90-05 $439.95

 

M1 Hard Core Bar 1990-1997 (plastic window only) - Designed for the serious competitor that wants to maintain a dual purpose car for street and racing use. Tallest available. (1 3/4” diameter x .125” wall). Does not work with a Hardtop, see below for Hard Core bars with Hardtops.

MM045-HC1D M1 Hard Core w/single Dia, black, plastic window only 90-97 90-97 $398.95

MM045-HC2D M1 Hard Core w/double Dia, black, plastic window only 90-97 90-97 $439.95

 

M2 Hard Core Bar Hardtop 1990-2005 -
Designed for the serious competitor that wants to maintain a dual purpose car for street and racing use. Tallest available. (1 3/4” diameter x .125” wall). For 90-05 Miatas with a Hardtop and glass window on soft top.

MM045-MHT1D M2 Hard Core w/single Dia, black, for Hardtop and glass window on softtop 90-05 90-05 $414.95

MM045-MHT2D M2 Hard Core w/double Dia, black, for Hardtop and glass window softtop 90-05 90-05 $439.95

 

 

M1 Hard Core Hardtop Bar 1990-1997 (plastic window only) - Designed for the serious competitor that wants to maintain a dual purpose car for street and racing use. (1 3/4” diameter x .125” wall). For 90-97 Miatas with a Hardtop and plastic window on soft top.

MM045-HT1 M1 Hard Core w/single Dia, black, for Hardtop and plastic window softtop 90-97 90-97 $414.95

MM045-HT2 M1 Hard Core w/double Dia, black, for Hardtop and plastic window softtop 90-97 90-97 $449.95

 

Beatrush Slim Hard Top Latch Kit for 1990-2005 Miatas

This Latch kit is great if you have a rollbar installed and you are either unable or have difficulty fastening your side latches. Also they are a great upgrade from the dull OEM Latches. These work with all hard tops. MADE IN JAPAN

MM005-BRL Beatrush Hardtop Latch Kit 90-05 90-05 $154.95
 

 

 

 

 

 

 


 


 

 

Miata Parts & Miata Accessories & Miata Products

© 1989-2008 MM Marketing. All Rights Reserved

222 Franklin Street Fayetteville, NC 28301 1-800-666-4282

home    catalog    specials    about us    newsletter    nc clubs    international dealers    owner showcase    order info